GameClub Community Forums

GameClub => Technical Support => Topic started by: hammerkiss22 on April 12, 2019, 09:37:42 AM



Title: Old version Client - FIX
Post by: hammerkiss22 on April 12, 2019, 09:37:42 AM
Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.


Title: Re: Old version Client - FIX
Post by: Cfpro2 on April 12, 2019, 04:33:34 PM
I tried everything , kahit yung ganito , Old version Client ERROR pa din , I tried Reinstalling , manual patch update , version ini fix Still ayaw pa din hayys.


Title: Re: Old version Client - FIX
Post by: hammerkiss22 on April 16, 2019, 12:22:54 PM
I tried everything , kahit yung ganito , Old version Client ERROR pa din , I tried Reinstalling , manual patch update , version ini fix Still ayaw pa din hayys.

Na pansin mo ba na pag ni run mo yung "patcher_cf2.exe"
Bumabalik sa default yung laman ng Version.ini?

After mo ma paste yung code sa post at ma save, bagohin mo muna yung Authenticated Users and under Permission for Authenticated Users dapat naka DENY ang WRITE.

para pag ni run mo yung patcher uli hindi na nya ma change yung settings dun sa version.ini file. :)

Try mo uli Sir


Title: Re: Old version Client - FIX
Post by: MerryMage on April 16, 2019, 11:55:14 PM
- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)

This actually solved my problem running the client. Seems to work if the client has been denied access to write the version.ini file.


Title: Re: Old version Client - FIX
Post by: earlearl16 on April 18, 2019, 01:33:27 AM
Na try ko na lahat ng sinabi niyo. 1334 na ung new update. di parin. i tried copy pasting the edit, deny write wala parin. what should i do?


Title: Re: Old version Client - FIX
Post by: VaShThAmpHeD on April 18, 2019, 10:43:17 PM
Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.


thanks dito ts. its working.


Title: Re: Old version Client - FIX
Post by: ram0eld on April 23, 2019, 06:03:56 PM
too bad not working sakin tong fix nato..hahays malas nmn..di man lang ma address ng moderator tong problemang to...


Title: Re: Old version Client - FIX
Post by: earlearl16 on April 24, 2019, 08:42:21 PM
Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.


Please update kasi 1334 na di na to nagana.


Title: Re: Old version Client - FIX
Post by: khempoy1968 on April 24, 2019, 09:14:56 PM
I tried the fix, yes nag patch na sya, kaso panay download fail. kahit mabilis naman net ko. hmm bakit kaya? help please. TIA


Title: Re: Old version Client - FIX
Post by: SACRED-SPIRIT on April 30, 2019, 07:08:21 PM
Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.


TNX BRO gumana sa akin tong version.ini na code yung ibang code ko ginamit kanina d kasi gumana!


Title: Re: Old version Client - FIX
Post by: astigASO on May 07, 2019, 07:09:26 AM
After ko gawin yung step na binigay nyo ang error nya naman is "This is an invalid client
Please reinstall to the latest cliet".
Kakainstall ko lang ng bagong client sa shop ko, kakadownload ko nga lang ng game mismo sa website ng gameclub kasi me mga nag rerequest, pahirapan naman ma run yung game. Di naman to dating ganto. Wala bang fix to parang walang mga nagrereply na gm / moderators sa mga problema dito.


Title: Re: Old version Client - FIX
Post by: jtitar1 on May 07, 2019, 12:29:44 PM
same problem  den po skin

Na update ko NA yun  version  naka deny nden yun write ni authenticated users . DI n rin nababago ang version


PERO DI PAREN NAGANA error paden ... may proBlema ang update nyu mag create kyu ng bagong client na updated

[version]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[download]
server1 = http://download.gameclub.ph/cf/npatch/

[server]
count = 1
IP1 = 125.5.7.154
port1 = 13006

[HGW]
port = 16666
server1 = 125.5.7.156
POD1 = 34
server2 = 125.5.7.157
POD2 = 33
server3 = 125.5.7.206
POD3 = 33


Title: Re: Old version Client - FIX
Post by: beefstake22 on May 09, 2019, 06:55:07 PM
Doesn't work on my end. Windows 8.1, it just keeps changing it back.


Title: Re: Old version Client - FIX
Post by: Floor19th on May 09, 2019, 07:54:43 PM
nireport ko na yan antay antay lang daw. mga after century tpos na mafix yan

yung manual patch taon na binilang nabulok na

kapag gnyan dpat may manual patch sila yun nalang wala pa e
magpopost sa forum ng manual patch sira naman anung gagawin dun?


Title: Re: Old version Client - FIX
Post by: sergelouie66 on May 20, 2019, 06:55:58 PM
This is working! Don't forget the end part of the instructions!


Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.



Title: Re: Old version Client - FIX
Post by: SpectatorX on May 22, 2019, 09:21:53 PM
It worked. Thank you very much.


Title: Re: Old version Client - FIX
Post by: delarama69 on May 28, 2019, 10:34:47 PM
Pwede patingin ng version.ini nyo ? Check ko lang kung anong patch na ngayon. Salamat.


Title: Re: Old version Client - FIX
Post by: username123456789 on June 01, 2019, 01:16:10 AM
This is working! Don't forget the end part of the instructions!


Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.

sabi required patch file not found ano ba talaga gagawin ko dito ilang araw na to


Title: Re: Old version Client - FIX
Post by: kitvlogss on June 04, 2019, 06:48:37 PM
Try this, might fix yours too.

- Open installation directory CROSS FIRE PH.
- Open in "Version.ini" file in note pad and paste & replace this code:


[VERSION]
LatestVersion = 1333
MinimalVersion= 1315
OwnVersion = 33

[DOWNLOAD]
server1 = http://download.gameclub.ph/cf/npatch/

[SERVER]
COUNT = 1
IP1 = 125.5.7.154
PORT1 = 13006

[HGW]
PORT = 16666
SERVER1 = 125.5.7.156
POD1 = 34
SERVER2 = 125.5.7.157
POD2 = 33
SERVER3 = 125.5.7.206
POD3 = 33



- Ctrl+S or click save then close.
- right click the "version.ini" file, click - Properties, click - Security tab, click - Edit, Select "Authenticated Users and under Permission for Authenticated Users - Scroll down and thick/check DENY on WRITE. Click apply and close, this should prevent the client to change default settings for version.ini. (DO NOT make the file as Read only)
- right click patcher_cf2.exe and Runs as Admin.
- It should start to patch Good luck! :)



This works for me on windows 10.


Ano po ba yung windows 10 nyo? anong version po ba; win 10 pro ba?